Service manual

2-10 Installation: Mechanical Installation
2.2.1.4 Unpacking Floor-Mount Cabinets
The floor-mount cabinets are shipped mounted to a wooden skid, secured with corrugated corner
braces held by a plastic strap, and covered with a cardboard cover. Unpack the equipment as
described below.
1. Remove cardboard cover from floor-mount cabinet.
2. Cut band as shown.
3. Remove top packing spacer and corrugated corner supports. (See Figure 2-4 for Step 1 to
Step 3.)
Figure 2-4 Remove Cardboard Cover
Cardboard
Cover
Corrugated
Corner
Supports
Wooden
Skid
Cut This
Band
Top P a c k i ng
Spacer