Service manual

2-8 Installation: Pre-Installation Considerations
2.1.8 Recommended Tools and Equipment
In addition to the typical compliment of hand tools, the following tools and equipment are
recommended for proper installation of the base station/repeater equipment.
• Tarpaulin or plastic drop cloth or cover surrounding equipment while drilling concrete anchor
holes (for installations where cabinet or rack is being anchored to concrete).
• Vacuum cleaner for removing concrete dust caused by drilling.
2.1.9 Equipment Unpacking and Inspection
The base station/repeater equipment may be shipped by either air freight or electronic van (as
specified by customer), except where noted. The base station/repeater is shipped in a box; the base
station/repeater is positioned between pieces of cushioned corrugated cardboard.
Thoroughly inspect the equipment as soon as possible after delivery. If any part of the equipment
has been damaged in transit, immediately report the extent of the damage to the transportation
company and to Motorola.
NOTE: Antistatic plastic bags should be kept for future shipping/transporting of base station/repeater.
2.1.10 Base Station/Repeater Unpacking
When a base station/repeater is delivered from Motorola, it arrives in suitable packing materials. If
the unpacked equipment is damaged, return it to Motorola in its original packaging.
Equipment should be handled in its original packaging until it is delivered
to its final destination. If the equipment is damaged while being moved
without the original packaging, the warranty claim is not valid.
W A R N I N G