Service manual

2-6 Installation: Pre-Installation Considerations
2.1.6.2 Modular Racks
See Table 2-3 for the rack models and associated description.
The side, top and bottom views for all available modular racks are shown in Figure 2-2. The top and
bottom plates are identical, and all dimensions and clearances are common to all racks.
Recommended clearance front and rear is 91.44 cm (36 in) minimum for servicing access. Refer to
Equipment Ventilation for recommended ventilation clearances.
FRU kit CLN6679 (Rack Mount Hardware) is included with each rack model. This allows proper
installation of the MTR3000 base station/repeater within the rack’s center of gravity.
NOTE: This kit includes two rack mount standoffs and eight mounting screws.
Figure 2-2 Modular Rack
Table 2-3. Rack Models
Model Description
THN6752 30 inch Modular Rack (16 RK U)
THN6753 45 inch Modular Rack (24 RK U)
THN6754 52 inch Modular Rack (27 RK U)
Rack Center
SIDE VIEW
TOP/BOTTOM
VIEW
Hole