Installation & Assembly

DEMI LUNE

ASSEMBLY INSTRUCTIONS

Wall

" Fisher

Screws

Wall

1 2

Assembly Steps :

1. Place Demi lune at the right place

2. Mark the wall with the hole below the top at the back Demi lune.

Move Demi lune to another place.

Drill the wall that already marked (drill 5/16 ").

Put fisher S5/16" at the holes wall.

3. Place the table as before. Input screw to tighten Demi lune

Screws

SIDE VIEW

SECTION

WALL ANCHOR ASSEMBLY STEPS:

1. Position table against wall

2. Using a pencil, mark the wall where the holes in the back of the demilune are lo-

cated (see Box 3).

3. Remove demilune from the wall.

4. Using a 5/16” drill bit, drill holes where wall is marked.

5. Insert wall fisher

6. Reposition demilune and secure to wall using screws provided.

7. Tighten screws with allen wrench or screw driver.

*Excessive tightening can cause stripping, splitting, and cracking of the wood.