Installation & Assembly

DEMI LUNE
Assembly Steps :
2. Install the legs by corresponding numbers stamped on leg top and corner brace
4. Place the demi lune into final position and mark location for wall anchor.
( if possible screw directly into wall stud )
5. Fasten screw tightly to wall.
1. Place table top upside down on surface that will not damage or scrath the finish.
3. Tighten the bolts on the table and legs .Flip the table to side up.
ASSEMBLY INSTRUCTIONS
Round head bolt
M8x50
ASSEMBLY INSTRUCTIONS
CAMILLE DEMILUNE| RAW102
ASSEMBLY STEPS:
1. Place demilune upside down on a surface that will not damage or scratch the finish.
2. Install the legs by matching corresponding numbers stamped on the leg and corner
brace.
3. Secure legs to the frame using bolts and washers provided. Tighten with a screw
driver.
4. Flip the demilune right side up.
5. Place demilune into final position and mark location for wall anchor. If possible,
screw wall anchor directly into wall stud.
6. Secure wall anchor using screws provided.
*Excessive tightening can cause stripping, splitting, and cracking of the wood.