User Manual

Page 9 of 19
MMP3731 (DFP5502) Manual.doc
Using Special Functions
Equalizer Mode (EQ)
The current equalizer mode is displayed in the lower left hand corner of the LCD screen in a
rectangular block with a black background.
Changing the EQ mode
- Press and hold the (l/EQ/O) button until the current mode is displayed with a clear
background. Keep pressing the (l/EQ/O) button repeatedly to select one of the six
equalizer modes:
- Stop pressing the (l/EQ/O) button when your desired selection is displayed with a
clear background. The background will turn back to the black after a few seconds.
Repeat Button
Press the (l /EQ/ O) button repeatedly to select different repeat mode options. As each
mode is selected, the following icons will displayed in the upper right hand corner of the
LCD screen:
“ ” Randomly play all the files in the player once.
“ ” Randomly play all the files in the player continuously.
“ ” Plays a single file repeatedly.
“ ” Play all the files repeatedly in consecutive order.
“ ” Edits and plays one section repeatedly. Press button once to start \with point A
and press button again to end with point B .
“ ” Plays the play list once. (The play list must be created before using this function.)
“ ” Plays the play list repeatedly. (The play list must be created before using this
function)
NAVIGATION
You may search for, listen to, and program the play list in the Navigation mode. Press the
MODE button and use the : or the 9 button to highlight the Navigation icon as shown.
(picture of Porgram)