User manual

95
Version 2.4 (10/2011) en
Original instructions
Drum Motor
Initial startup and operation
Initial start up
Do not operate the Drum Motor before the motor is correctly installed and
connected to the power supply, with all rotating parts protected or guarded by the
original equipment.
Inspections before initial
startup
The Drum Motor is supplied factory-filled with the correct amount of oil and is
ready for installation. However, before the initial startup of the motor the following
procedures must be carried out:
¾ Ensure that the motor data label matches the specification ordered.
¾ Ensure that no objects are in contact with rotating or moving parts.
¾ Ensure that the Drum Motor and the conveyor belt are free to move.
¾ Ensure that the belt is tensioned correctly according to the Interrolls
recommendations.
¾ Ensure that all bolts are tightened according to the specifications.
¾ Ensure that no additional dangerous areas arise due to interfaces with other
components.
¾ Ensure that the Drum Motor is wired correctly and connected to the correct
supply voltage.
¾ Check all safety devices.
¾ Ensure that no bystanders are in dangerous areas around the conveyor.