User manual

7
Version 2.4 (10/2011) en
Original instructions
Drum Motor
Safety
Avoiding malfunctions in
operation
¾ Regularly check the Drum Motor for visible damage.
¾ In case of fumes, unusual noise or blocked or damaged goods, stop the Drum
Motor at once and ensure that the Drum Motor cannot be started accidentally.
¾ Contact qualified personnel immediately to find the source of the malfunction.
¾ During operation do not step on the Drum Motor or on the conveyor/machine
in which it is installed.
Maintenance
¾ As the product is maintenance free, you only need to check regularly for
visible damages, unusual noise and that the fixings, screws and nuts are still
tightened.
¾ Do not open the Drum Motor.
Accidental motor starts
¾ Use caution while installing or maintaining the Drum Motor, or while it is under
error conditions, since it may start accidently.
Interfaces
By assembling the Drum Motor in a conveyor module, potential hazards may
occur. These are not described in this manual and must be analyzed during the
design, installation, and startup of the conveyor module.
¾ After assembling the Drum Motor in a conveyor module or other similar
equipment, check the whole system for any new potential dangerous condition
prior to turning on the equipment.