User manual

3
Version 2.4 (10/2011) en
Original instructions
Drum Motor
Introduction
Handling of the user manual
This manual covers the following Drum Motor types:
• 80S, 113S
• 80i, 113i, 138i, 165i, 216i, 217i, 315i
• 113E
• SN062D-082, SN062D-102, SN062D-113
Contents of the manual This manual contains important advice, notices, and information about the Drum
Motor in all phases of its lifecycle:
• Transport, assembly, and commissioning
• Safe operation, maintenance, troubleshooting and disposal
Validity of the manual The manual describes the Drum Motor as it is delivered by Interroll.
Special application designs require validation from Interroll and additional
technical instructions.
This manual is part of the
product
¾ For trouble-free and safe operation, and warranty claims, read this manual
and follow the instructions before handling the Drum Motor.
¾ Keep this manual near the Drum Motor.
¾ Pass this manual on to any subsequent operator or occupant of the Drum
Motor.
¾ Interroll does not accept any liability for malfunctions or defects due to failure
of observe this manual.
¾ If you have any questions after reading this user manual, feel free to contact
our customer service. See the last page for contact information.
Warnings in this manual
The warnings in this document refer to risks which may arise while using the
Drum Motor. For relevant warnings, see "Safety", page 5 and the warnings at the
beginning of each chapter.
There are three categories of danger. The following signal words are used in the
document as required:
• Danger
• Warning
• Caution
Signal word Meaning
Danger Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Warning Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury.