User manual

47
Version 2.4 (10/2011) en
Original instructions
Drum Motor
Product information S-series
Dimensions of the S-series Drum Motor
Some of the dimensions are indicated as "SL+". SL is an abbreviation for shell
length. It can be generated from RL, which is indicated on the Drum Motor label
(see "Label of the i-series Drum Motor", page 18). For Drum Motors 80S and
113S RL is equal to FW.
• For Drum Motor 80S: SL = RL - 10
• For Drum Motor 113S: SL = RL - 22
All length dependant dimensions shown in the catalogue and this user manual
are in accordance with DIN/ISO 2768 (medium quality).
Hint
The recommended distance between the fixing brackets (EL) to allow for
maximum thermal expansion and internal tolerances is EL + 2 mm.
Dimensions of 80S
F
EL
AGL
ØE
ØA
SL
FW
ØB
D
1/3 1/3 1/3
H
C
C
H
Type A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
H
mm
FW
mm
EL
mm
AGL
mm
80S crowned
SL 270 to 612 mm
81.5 80 20 35 45 21 8 SL+10 SL+16 SL+56
80S crowned
SL 612 to 962 mm
83 81 20 35 45 21 8 SL+10 SL+16 SL+56
80S cylindrical
SL 270 to 612 mm
80.5 80.5 20 35 45 21 8 SL+10 SL+16 SL+56
80S cylindrical
SL 612 to 962 mm
83 83 20 35 45 21 8 SL+10 SL+16 SL+56
113S crowned 113.3 112.5 20 35 45 21 14 SL+22 SL+28 SL+68
113S cylindrical 113.3 113.3 20 35 45 21 14 SL+22 SL+28 SL+68