User manual

119
Version 2.4 (10/2011) en
Original instructions
Drum Motor
Appendix
Declaration of incorporation
in terms of the EC-Machine Directive 2006/42/EG, Annex II 1 B
The manufacturer
hereby declares with sole responsibility that the product series
• Drum Motor i-series
• Drum Motor S-series
• Drum Motor E-series
• Drum Motor D-series
fully comply with the safety and health requirements of the Machinery
Directive 2006/42/EC Appendix I.
The relevant technical documents according to appendix VII B are available and
will be presented to the competent national authorities electronically, if required.
Person authorised to compile the technical file: Holger Hoefer, Interroll
Trommelmotoren GmbH, Opelstr. 3, D-41836 Hueckelhoven
The partly completed machinery complies with the following EC directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2002/95/EC
The following harmonised standards were applied:
• EN ISO 12100-1
• EN ISO 12100-2
• EN ISO 14121-1
Initial start-up of the partly completed machinery is not permitted until the
machinery is incorporated into a machinery which complies with the
machinery directive. The EC declaration of conformity must be available
according to appendix II A.
Hueckelhoven/Baal, Germany, December 18
th
2009
Helmut Leuver
(Managing Director)
(This declaration can be obtained at www.interroll.com, if needed.)
Interroll Trommelmotoren GmbH
Opelstr. 3
41836 Hueckelhoven/Baal
Germany