This product represents a new generation of MP3 players supporting MP1, MP2, MP3, WMA, WMV, ASF, and WAV. FEATURES SUMMARY ● Compact size ● Support virtually all music file formats such as: MP1, MP2, MP3, WMA, WMV, ASF, and WAV. ● Supports firmware update the latest firmware can always be downloaded from the AVB website (www.avbusa.com). ● Supports FM radio Using Auto-search or manual search, the player can save up to 40 different radio stations. The frequency varies from 87 KHz to 108 KHz.
INTRODUCTION Congratulations on purchasing of this MP3 player! Before starting to use it please, read this manual carefully. Due to the constant production improvement, the MP3 Player you have purchased might be slightly different then the one described in this manual. We recommend you to visit the www.avbusa.com to download the updated Manual and Software in this case.
• • Buttons usage definition The buttons can be used in 3 different ways: Press: Press the button then release it immediately. Long time press: Press and hold the button for about 2 seconds, then release it. Press and hold: Press and keep holding the button. Display screen Battery indicator Displays the battery current charging status. When the battery is fully charged it will be displayed as on the picture (black square). When the battery is low the square will became empty.
o Record mode screen: o Recording playback mode screen: o FM mode screen: o System settings screen: o Connection with PC screen: • Volume adjustment Press “VOL+” to increase the volume. Press “VOL–” to decrease the volume. • Power ON/OFF Press and hold “Play/Pause” button to turn the Mp3 player on.
• While the MP3 is playing, press and hold the “Play/Pause” to turn the MP3 player off. Play/Pause In the Music mode press the “Play/Pause” button to playback the music. • Record/Pause In the Record mode press this button to start or stop recording, press the button for more than 2 seconds (long time press) to stop the recording. In any mode press the “Mode” button for 2 seconds (long time press) to enter the main menu.
• Music playback Please, follow the steps below 1. Connect your earphone to the earphone jack of the MP3 player. 2. Press the “Play/Pause” button for 2 seconds (long time press) to turn your MP3 player on, enter the Music mode, then press “Play/Pause” again to playback the music. 3. Select music: Press the button to select the next, to select the previous one. 4.
• Voice recording The MP3 player can save up to 99 recorded files in its memory. ο Recording 1. Enter the Main menu: 2. Press the ” button to select the record mode. 3. Press the “Mode” button to enter the record mode: 4. Press the “Play/Pause” to start recording. Recorded file can be saved either in the root directory or in the sub-directory. If you get the message “Disk full” on the screen, that means there is not enough space to save the recorded file, you should delete the file to get the space.
ο Select recording type 1. Enter the Record submenu pressing the “Mode” button 2. Press the “ ” button to select the record type, press “Mode” button to confirm the choice: ο The record type can be one of the following: : Fine Record, .WAV file format, the best quality sound but creates much bigger files. : Long time record, .act file format, average quality sound. : High quality voice control recording, .WAV format. In this mode the MP3 will not record anything if there is no sound around.
VOL+ : Increase volume VOL－ :Decrease volume • File recorded in .ACT format can be converted to .WAV Use the supplied utility software to convert the recorded .ACT file to the .WAV file. 1. Run the “Sound Converter” software utility. You will see the following dialog box: 2. Select the recorded file.
3 .Click “Convert” to create .WAV file. You can also convert the .WAV file to MP3 format using the same utility.
z FM Radio To use the FM radio please, follow the steps below: 1. Enter the main menu 2. Press the button until you select “FM” 3. Press the “Mode” button to enter the “FM” menu. 4. Auto search for the Radio station Press the “ ” button for 2 seconds (long time press), the player will auto search for / the next Radio station with the 100KHz increment forward or backward, it will not stop until the a clear radio station has been found.
Press the “Play/Pause” button to select and listen to the saved radio station. 8. Volume Control Press Vol+ or Vol- to increase or decrease the volume. : You can save up to 20 radio stations in your MP3 player. : To delete the radio station please refer to the section Delete file below.
SYSTEM SETTINGS • How to change the System settings 1. Enter the main menu 2. Press the button to select “SYS” 3. Press “Mode” button to enter the “SYS” system settings submenu. • The system settings are listed below (Record Time) (Back Light) Sets the date and time of the recorded files. Sets the timing of the backlight.
• System settings explanation ○ Setting “Record Time” 1. The screen will look as shown below: 2. Press the “Mode” button to enter the submenu. The screen will look as shown below: 3. Press “VOL+” (VOL-)to select the date and time. 4. Press the button to increase or press to decrease. 5. Having finished adjusting the time, Press the “Mode” button to confirm. ○ Setting “Back Time” 1.Enter the system settings menu 2. Press the button to select ”Back time” 3.
○ Setting “Language”. Please, operate in a similar fashion as the “Back time” setting. ○ Setting “Power off“. The same as the “Back time”. There are two settings here: Off time: Set your auto-off time, the unit is in seconds Sleep time: Set your sleep mode time, the unit is in minutes, the max setting is 120 minutes. ○ Settings “Replay mode”/ “Contrast”/“Online mode”. The same as the “Back time”. ○ “Memory Info.” Shows the percentage of the disk storage space which is currently used and free.
• Use MP3 player as a USB Disk This MP3 player can be used as a USB disk. There is no need to install any driver (with exception of Windows 98) under Windows 2000/XP, Mac OS 10.3 or above, Linux Reshat 8.0 or above. The MP3 player can use the USB port power, so when it is connected to the PC the battery is not used. If you want to playback the music when MP3 player is connected to the computer, during the “wait mode” press the “Mode” button, then you will enter the main menu.
• MP3 player firmware update Your MP3 player can be updated use the utility software supplied with it. To upgrade the MP3 player firmware please, follow the steps below: 1. Enter the main menu 2. Press the button to select “Sys Set” 3. Press the “Mode” button to enter the “Sys Set” submenu. 4. Press the button to select the “firmware update”, then press the “Mode” button to enter the submenu. 5. Connect your MP3 player to PC. 6.
8. Select the new firmware file 9. Click the “Begin Upgrading” button to update the player.
If update is successful the mp3 player will display the following: Firmware update is to improve the mp3 player, however it is not necessary to do that, your MP3 player will work normally without any update. Firmware update used in a wrong way might damage your MP3 player! Before updating please, read the instruction carefully. Make sure that the uploaded file does correspond to your model of the MP3 player. The person performing update is supposed to have some experience in working with computers.
OTHER SETTINGS • Select different directory It is possible to use a different directory rather than the root directory for the recording or music playback. The MP3 player can support up to 9 directories which the MP3 can use to playback files in there. To do that please, follow the steps below . 1. The player should be stopped in 2. Press the “Mode” button to music mode (shown below), enter the following menu. recording or playback mode. 3. Press the “Mode” button again to 4.
files and the Radio stations. To do that, follow the steps below: 1. The MP3 should be stopped.(In all modes 2. Press “Mode” button to choose excluding FM) the directory 3. Press the “ button to select 4. Press “Mode” button to get the following screen: button to change “NO” to 6. Press “Mode” button to confirm the choice / ” “single file” or “all files”. 5. Press the “YES” The choice “Delete All” will delete all the files in the selected directory for the chosen mode (e.g.
If you prefer to delete the files from your PC when MP3 is connected to the USB port, make sure you use the Safely Remove Device wizard of Windows before you unplug the MP3 player from the USB port. Otherwise some data might get corrupted. • Repeat Mode(Playback submenu) During music and recorded file playback, it is possible to choose a number of special “playback modes” (e.g. repeat, shuffle etc.
During the music playback (only for the MP3 file), it is possible to choose different playback speed (speed up or slow down), the volume will not change. 1. During the music playback press the “Mode” button to enter the menu. 2. Press the button to select “Play Speed” menu. 3. Press the “Mode” button to enter the “Play Speed” submenu. 4. Press the button to “speed up” or press the to slow down. Note: The playback speed will be saved in the MP3 player memory and it won‘t change until you set it again.
The MP3 will now start to repeat the playback from the point A to the point B. Having repeated the marked fragment for a number of times (this number can be set) the playback will stop. When the player is in the repeat mode it is possible to renew the setting of the points A and B. During the “repeat mode”, you can press the VOL+ or VOL- button to set the “playback speed”.
2. Having finished the 1.After you enter the Compare playback of the original Mode, the icon will display “ ”, fragment the icon will change then the MP3 player will to“ ” and the MP3 will playback the original MP3 file. playback your recording. Press the button to return back. During the “compare mode”, press “Mode” button to exit the “repeat mode”. ο The number of repeat times Please refer to the “backlight time” system setting. ο Repeat interval Please refer to the “backlight time” system setting.
3. The following window will be displayed: 4. You can select the size of the encrypted part of the disk, then press the “Start” button 5. Press “OK” and then restart your computer. 6. After computer finishes the reboot, you will see two removable disks on your computer (see the comments above about the operating systems before Windows 2000 SP4). Choose the encrypted disk, you will see only three files there (two of which will be hidden), one of them is the .
. 8. Now whenever you connect your MP3 player to the computer, you won’t be able to use it until you enter the user name and the password. Note: If you want to encrypt the disk in the way described above, please, first backup your files, all the data will be lost after the encryption. Warning: Don‘t forget your password and the user name, otherwise you won’t be able to use your disk. In case the password is lost, you can only format the disk to regain the access, but then all your files will be lost.
TROUBLESHOOTING No power Check battery Check your power switch No music is heard in 1. Check the Volume level the earphones 2. Check the connection (earphone to the earphone jack) 3. Check if the music file can be played by the MP3 player. Wrong language Set correct language FM radio is not very Check if you have any interference with the clear nearby electric power devices Can‘t download music 1. Check if the USB cable properly connected to your computer 2.
SPECIFICATIONS Outside Dimensions Weight Display area Computer interface Memory Battery lifetime Recording MP3,WMA,WMV,ASF FM Radio 31mm×70mm×17mm 25g (not including battery) Lattice (128×32) EL Backlight Full Speed USB 2.0 (Read 1000KB, Write 800KB) Flash memory: Nand Flash. Playback up to 10~14 hours.
Music formats supported Temperature range Language support Operating system Signal to noise 45dB ratio MP1, MP2, MP3, WMA, WMV, ASF, WAV -5 ~ +40 Degree English, German, Chinese, … Windows98SE/ME/2000/XP,Mac OS 10, Linux 2.4.2 Web : www.avbusa.com Support : support@avbusa.
