Manualshelf

User's Manual

ManualsBrandsAvaya ManualsIP phonesSIP Software 3.1 for 1100 Series
919293949596979899100
PACKET_LOSS_WARN [xx] This parameter is the threshold to send a report on Packet
Loss greater than [xx]. The default is 256 (1%). Using 0 resets
the threshold to default.
- xx – is an INTEGER value scaled by 256 that is used as
threshold. The range is 1 to 25600.
PACKET_LOSS_EXCE [xx]
This parameter is the threshold to send a report on Packet
Loss greater than [xx]. The default is 1280 (5%). Using 0 resets
the threshold to default.
- xx – is an INTEGER value scaled by 256 that is used as
threshold. The range is 1 to 25600.
JITTER_ENABLE [YES | NO]
This parameter enables or disables alerts based on the inter-
arrival Jitter on incoming RTP packets inter-arrival time. The
value is represented in 1/65536 of a second.
- YES – enables the sending of alert report based on jitter
detection
- NO – disables the sending of alert report based on jitter
detection
JITTER_WARN [xx]
This parameter is the threshold to send a report on Inter-arrival
Jitter greater than [xx]. 1 second is broken up into 65535 (0xffff
hex) parts. [xx] / 65535 is the threshold in seconds. The default
is 3276 (50 ms). Using 0 resets the threshold to default.
- xx – is an INTEGER value used as threshold
JITTER_EXCE [xx]
This parameter is the threshold to send a report on Inter-arrival
Jitter greater than [xx]. 1 second is broken up into 65535 (0xffff
hex) parts. [xx] / 65535 is the threshold in seconds. The default
is 32760 (500 ms). Using 0 resets the threshold to default.
- xx – is an INTEGER value used as threshold
DELAY_ENABLE [YES | NO]
This parameter enables or disables the alerts based on the
excessive delay detection. This is the one-way delay
(including system delay) for the call, measured in
milliseconds.
- YES – enables Excessive delay detection.
- NO – disables Excessive delay detection.
DELAY_WARN [xx]
This parameter is the threshold to give warning on Excessive
Delay greater than [xx]. The default is 150 ms. Using 0 resets
the threshold to default.
- xx – is an INTEGER value used as a threshold measured in
1/1000 of a second.
VQMon configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 99