User's Manual

LISTENING_R_ENABLE
[YES | NO]
This parameter enables or disables the alerts based on the
Listening R Minor and Major Thresholds. The default value is
vocoder-dependent, using a scale from 1 (lowest quality) to
100 (highest quality). Currently, default values are used based
on VOCODER on a per-call basis as summarized below.
- YES – enables the sending of the alert report based on the
Listening R Value.
- NO – disables the sending of the alert report based on the
Listening R Value.
VOCODER_G711_ULAW
VOCODER_G711_ULAWP
LP
LISTENING_R_WARN = 80
LISTENING_R_EXCE = 70
VOCODER_G723
VOCODER_FLAG_G723_
RATE_53
VOCODER_FLAG_G723_
RATE_63
LISTENING_R_WARN = 60
LISTENING_R_EXCE = 50
VOCODER_G729
VOCODER_G722
VOCODER_PCM16
VOCODER_PCM8
vqmonVocoderTypeUnkno
wn
LISTENING_R_WARN = 70
(default if not configured
and unknown type)
LISTENING_R_EXCE = 60
LISTENING_R_WARN [xx]
This parameter is the threshold to send a report on Listening
R less than [xx]. The default value is 70. Using 0 resets it to
default based on far end VOCODER.
- xx – is an INTEGER value used as threshold.
LISTENING_R_EXCE [xx]
This parameter is the threshold to send a report on Listening
R less than [xx]. The default value is 60. Using 0 resets it to
default based on far end VOCODER.
- xx – is an INTEGER value used as threshold.
PACKET_LOSS_ENABLE
[YES | NO]
This parameter is used to enable or disable the alerts based
on the packet loss thresholds. Packet loss is the fraction of
RTP data packets from the source lost since the beginning of
reception. The value is an integer scaled by 256. The range is
1 to 25600.
- YES – enables the sending of alert report based on the
packet loss.
- NO – disables the sending of alert report based on the packet
loss.
Configure the provisioning server
98 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]