User's Manual

STUN_SERVER_IP1[ip_address] NAT traversal using STUN protocol requires a
STUN server in the public internet. Two STUN
server IP addresses can be provisioned.
- ip_address – is the IP address of STUN server
1.
STUN_SERVER_IP2[ip_address]
NAT traversal using STUN protocol requires a
STUN server in the public internet. Two STUN
server IP addresses can be provisioned.
- ip_address – is the IP address of STUN server
2.
STUN_SERVER_PORT1[port_number]
This parameter is the port number used
corresponding to STUN_SERVER_IP1. The
default port number is 3478.
- port_number– is the port number.
STUN_SERVER_PORT2[port_number]
This parameter is the port number used
corresponding to STUN_SERVER_IP2. The
default port number is 3478.
- port_number– is the port number.
VQMon configuration commands
Important:
Ensure you read How VQMon works on page 138 before configuring the VQMON
parameters.
VQMON_PUBLISH [YES |
NO]
This parameter enables or disables the publish message
containing the voice quality monitoring metrics sent to the
Proactive Voice Quality Monitoring (PVQMoN) collecting
server. The default value is NO.
- YES – enables VQMoN.
- NO – disables VQMoN.
VQMON_PUBLISH_IP
[xxx.xxx.xxx.xxx]
This parameter configures the IP address of the PVQMoN
server that collects voice quality monitoring metrics from the
publish message.
This IP address is used only within the report.
VQMon configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 97