User's Manual

- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
For example, 440,480; 2000,4000 (440 and 480 Hz with 2
seconds on, 4 seconds off)
BUSY_TONE [frequency1
| frequency2 | on_time |
off_time]
This parameter selects the tone advising the caller that the
telephone number is busy. You can select the country-specific
tone. The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
FASTBUSY_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that the
telephone number is busy. It is fast in cadence or frequency. You
can select the country-specific tone. The default tone is the North
American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
CONGESTION_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that the
groups of lines or switching equipment necessary for setting up
the required call, or for the use of a specific service, are
temporarily engaged. You can select the country-specific tone.
The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
Tone configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 95