User's Manual

value is retrieved from the Service Package. The
default value is 44.
- x –– a value from -1 to 63 indicating the DSCP
value.
DSCP_MEDIA_PRIORITY [x]
This parameter uses a value entered in decimal format
between -1 and 63 representing the DSCP value in the
provisioning packets for priority precedence and
priority level voice call. If the value is -1, the DSCP
value is retrieved from the Service Package. The
default value is 45.
- x –– a value from -1 to 63 indicating the DSCP
value.
DSCP_OAM [x]
This parameter uses a value entered in decimal format
between -1 and 63 representing the DSCP value in the
provisioning packets for OA&M precedence and
priority level voice call. If the value is -1, the DSCP
value is retrieved from the Service Package. The
default value is 18.
- x –– a value from -1 to 63 indicating the DSCP
value.
Tone configuration commands
DIAL_TONE [frequency1 |
frequency2 | on_time |
off_time]
This parameter selects the tone advising the caller that the
exchange is ready to receive call information and invites the user
to start sending call information. You can select the country-
specific tone. The default tone is the North American tone.
- frequency1 – the frequency of tone 1.
- frequency2 – the frequency of tone 2.
- on_time – the duration of the tone when it is on. A -1 indicates
a continuous tone.
- off_time – the duration when no tone is played.
For example, 350,440;-1 (350 and 440 Hz continuous tone).
RINGING_TONE
[frequency1 | frequency2
| on_time | off_time]
This parameter selects the tone advising the caller that a
connection is made and a calling signal is applied to a telephone
number or service point. You can select the country-specific tone.
The default tone is the North American tone.
Configure the provisioning server
94 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]