User's Manual

- DEFAULT — TIA audio tuning parameters are
applied (default value)
- S004 — S004 standard (Australia and New
Zealand) audio tuning parameters are applied
QoS and ToS commands
AVAYA_AUTOMATIC_QoS
[YES | NO]
This parameter provides a better treatment for signaling and
media packets after you deploy the IP Deskphones with the
Avaya switches. All the devices use private Differentiated
Services Code Point (DSCP) values to give better treatment
to the traffic coming from peer Avaya devices.
- YES –– the IP Deskphone uses private DSCP values,
unless overridden.
- NO –– the IP Deskphone uses either one of the configured
DSCP values or the system default values.
DSCP_CONTROL [x]
This parameter uses a value entered in decimal format
between -1 and 63. If the value is -1, the DSCP value is picked
up by the Service Package. The default value is 40.
- x –– a value from -1 to 63 indicating the DSCP value.
802.1P_CONTROL [x]
This parameter uses a value entered in decimal format
between -1 and 7 representing the 802.1P value in the SIP
signaling packets. If the value is -1, the 802.1P value is
retrieved from the Service Package. The default value is 6.
- x –– the value from -1 to 7 indicating the 802.1P value.
DSCP_MEDIA [x]
This parameter uses a value entered in decimal format
between -1 and 63 representing the DSCP value in the
Real-time Transfer Protocol packets. If the value is -1,
the DSCP value is retrieved from the Service Package.
The default value is 44.
- x –– a value from -1 to 63 indicating the DSCP
value.
802.1P_MEDIA [x]
This parameter uses a value entered in decimal format
between -1 and 7 representing the 802.1P value in the
IP Deskphone Media (RTP) packets. If the value is -1
Configure the provisioning server
92 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]