User's Manual

- YES– disables the speakerphone.
- NO – enables the speakerphone .
CALL_ORIGIN_BUSY [YES |NO] This parameter determines if the user is presented
with an incoming call when entering the address of
an outbound call. This is intended for DoD. The
default value is NO.
- YES– user is not presented with an incoming
call .
- NO – user is presented with an incoming call
(default).
FAST_EARLY_MEDIA_ENABLE [YES|
NO]
This parameter allows the administrator to activate
and deactivate the Fast Early Media option
(according to RFC 3264).
The default value is NO.
- YES - activate the Fast Early Media option
- NO - deactivate the Fast Early Media option
SLOW_START_200OK [YES |NO]
This parameter determines if the session
description is always sent in the 200 OK message
in response to an incoming call with SDP. The
default value is NO.
- YES – local administration UI is configured.
- NO – local administration UI is not configured
(default).
ENABLE_LOCAL_ADMIN_UI [YES |
NO]
This parameter configures the availability of the
local administration User Interface (UI) on the IP
Deskphone. The default value is YES.
- YES – local administration UI is configured
(default).
- NO – local administration UI is not configured.
LOGINALPHA_ENABLE [YES | NO]
This parameter allows the system administrator to
configure the initial login and logout of the IP
Deskphone to be in either alphanumeric mode or
numeric mode. The default is NO.
- YES – initial login and logout is alphanumeric.
- NO – initial login and logout is numeric (default).
FIPS_MODE [YES | NO]
FIPS mode is used in a Federal environment. This
parameter verifies that the IP Deskphone is in
Configure the provisioning server
90 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]