User's Manual

this soft key. The default value of the label is
"Support".
— label_string - label characters. Maximum length
of the string is 6 alpha-numerics characters.
Note:
The label appears if the
TECH_SUPPORT_ADDRESS parameter is
defined.
TECH_SUPPORT_ADDRESS
[addr_string]
This parameter configures the URI of the
Technical.Support service. If the IP Deskphone
licensing verification fails, then special dialog
appears where the IP Deskphone user can press
the Support soft key to call to the Technical Support
service (see the preceding command
TECH_SUPPORT_LABEL).
The default value is [e-mail].
DOD_ENABLE [YES | NO]
This parameter identifies whether it is a DoD ARTS
network. The default value is NO.
- YES – Call Forwarding Reminder service
subscribes to its own dialog event.
- NO – Call Forwarding Reminder service
subscribes to network-redirection-reminder event
package.
MLPP_NETWORK_DOMAIN [xx]
This parameter is the network domain of the user to
be added to the INVITE message of outgoing calls.
It can specify any MLPP Network Domain Name.
The default value is DSN.
MLPP_PRECEDENCE_DOMAIN [x]
This parameter is the local precedence domain of
the user to be added to the INVITE message of
outgoing calls. The default value is 000000.
CALL_WAITING_TONE [0|1] This parameter configures the call waiting tone. The
default value is 0.
- 0 – single buzz tone (default).
- 1 – two-beep periodic tone.
DISABLE_SPKRPHN [YES | NO]
This parameter disables the speakerphone for all
non-911 calls. This is intended for DoD. The default
value is NO.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 89