User's Manual

DOS_PACKET_RATE is < 1, other values are
ignored and packets are not dropped.
LOGSIP_ENABLE [YES | NO] This parameter enables or disable SIP-logging. The
default value is NO.
- YES – the SIP-logging Manager is active and
starts to log SIP incoming and outgoing packages
into the log file in FFS.
- NO – the SIP-logging Manager is not active and
cannot log SIP incoming and outgoing packages
into the log file in FFS.
USER_FILE_ENABLE [YES |NO]
This parameter is used to determine if the user.cfg
file is downloaded when the user logs on and when
they check for updates. The default is NO.
- YES – the user.cfg file is downloaded when the
user logs on and when they check for updates.
- NO – the user.cfg file is not downloaded
(default).
For more information, see
Roaming profiles on
page 166.
USER_FILE_PATH /<path>
This parameter defines the location of the
configuration file for each user which contains the
path to custom keys file.
DEFAULT_ADDRESSBOOK_FILE
[filename]
This parameter is the default filename used when
downloading the provisioning files. Default names
are overwritten by names specified in the user.cfg
file. For more information, see
Roaming profiles on
page 166.
DEFAULT_SPEEDDIALLIST_FILE
[filename]
This parameter is the default filename used when
downloading the provisioning files. Default names
are overwritten by names specified in the user.cfg
file. For more information, see
Roaming profiles on
page 166.
DEFAULT_CUSTOMKEYS_FILE
[filename]
This parameter is the default filename used when
downloading the provisioning files. Default names
are overwritten by names specified in the user.cfg
file. For more information, see
Roaming profiles on
page 166.
TECH_SUPPORT_LABEL
[label_string]
This parameter configures the label used for the
Support soft key on the licensing screen. The user
can call the Technical Support service by pressing
Configure the provisioning server
88 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]