User's Manual

required to be in the device configuration file. If
change is required, the USB_KEYBOARD
configuration command must be placed in the
device configuration file with the new value.
USB_HEADSET [YES | NO[
This parameter enables or disables the USB
headset. The default value is NO.
- YES – enables the USB headset
- NO – disables the USB headset (default).
Note:
If the default value is acceptable, the
USB_HEADSET configuration command is not
required to be in the device configuration file. If
change is required, the USB_HEADSET
configuration command must be placed in the
device configuration file with the new value.
Avaya recommends that you use the following
headset types:
- GNNetcom GN9350e
- Plantronics CS-50
USB_MEMORY_STICK [YES | NO[ This parameter enables or disables the USB flash
drive. The default value is NO.
- YES – enables the USB flash drive
- NO – disables the USB flash drive (default).
Note:
If the default value is acceptable, the
USB_MEMORY_STICK configuration command
is not required to be in the device configuration
file. If change is required, the
USB_MEMORY_STICK configuration command
must be placed in the device configuration file
with the new value.
ATA_REGION [reg_string] This parameter specifies the region for an ATA USB-
device.
The supported values are:
- NA
- EU1
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 85