User's Manual

- YES – can act on CFG files using the file manager
(default).
- NO – does not allow the user to delete of copy
CFG files on the IP Deskphone or USB drive
through the file manager (default).
ENABLE_USB_PORT [YES | NO]
This parameter enables or disables the USB port. If
configured as NO, all USB devices are disabled and
all other USB commands are ignored. The default
value is NO.
- YES – enables the USB port
- NO – disables the USB port (default).
Note:
If the default value is acceptable, the
ENABLE_USB_PORT configuration command is
not required to be in the device configuration file.
If change is required, the ENABLE_USB_PORT
configuration command must be placed in the
device configuration file with the new value.
USB_MOUSE [YES | NO[ This parameter enables or disables the USB
mouse. The dafault is NO.
- YES – enables the USB mouse
- NO – disables the USB mouse (default).
Note:
If the default value is acceptable, the
USB_MOUSE configuration command is not
required to be in the device configuration file. If
change is required, the USB_MOUSE
configuration command must be placed in the
device configuration file with the new value.
USB_KEYBOARD [YES | NO[ This parameter enables or disables the USB
keyboard. The default value is NO.
- YES – enables the USB keyboard
- NO – disables the USB keyboard (default).
Note:
If the default value is acceptable, the
USB_KEYBOARD configuration command is not
Configure the provisioning server
84 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]