User's Manual

WAV file on the IP Deskphone or on a USB drive
and presses the Delete or Send context-sensitive
soft key, an error message appears. If the value is
configured as YES, the user can delete or copy
WAV files with the file manager interface (this
applies to WAV files on the IP Deskphone and a
USB drive). The default value is YES.
- YES – allows the user to delete or copy WAV files
on the IP Deskphone or USB drive through the file
manager (default).
- NO – does not allow the user to delete of copy
WAV files on the IP Deskphone or USB drive
through the file manager.
FM_IMAGES_ENABLE [YES | NO] This parameter allows the user to act on JPG and
PNG files using the file manager. The default value
is YES.
- YES – can act on JPG and PNG files using the file
manager (default).
- NO – does not allow the user to delete of copy JPG
and PNG files on the IP Deskphone or USB drive
through the file manager.
FM_CERTS_ENABLE [YES | NO]
This parameter allows the user to act on CER and
PEM files using the file manager. The default value
is NO.
- YES – can act on JPG and PNG files using the file
manager.
- NO – does not allow the user to delete of copy JPG
and PNG files on the IP Deskphone or USB drive
through the file manager.
FM_CONFIG_ENABLE [YES | NO]
This parameter allows the user to act on CFG files
using the file manager. The default value is NO.
- YES – can act on CFG files using the file
manager.
- NO – does not allow the user to delete of copy
CFG files on the IP Deskphone or USB drive
through the file manager (default).
FM_LOGS_ENABLE [YES | NO]
This parameter allows the user to act on CFG files
using the file manager. The default value is YES.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 83