User's Manual

SCRNSVR_UNPRTCTD_ENABLE
[YES| NO]
This parameter enables or disables the User
Interface (UI) for configuring and using the
screensaver without a password. The default value
is NO.
- YES – enables the UI for configuring and using the
screensaver without a password.
- NO – disables the UI for configuring and using the
screensaver without a password (default).
SCRNSVR_TEXT [text]
This parameter configures the text displayed on the
screensaver of newly created profiles when the
screensaver/lock is active. Changes to this value
through the Prefs context-sensitive soft key
overwrites the value provided through provisioning.
The text string can have a maximum of 24
characters.
The default value is "Screensaver active".
SCRNSVR_MODE [DISABLE | PASS |
NO_PASS]
This parameter configures the display screensaver
mode of newly created profiles.
There is no option to pre-select a password
protected mode with a user-defined password.
Changes to this value through the Prefs context-
sensitive soft key overwrites the value provided
through provisioning. The values are DISABLE,
NO_PASS, and PASS. The default value is
DISABLE.
Note:
The selected setting must have the
corresponding feature mode enabled. For
example, if this flag is configured to NO_PASS,
then SCRNSVR_UNPRTCTD_ENABLE must be
configured to Y for the NO_PASS mode to be
configured on the new profiles.
SCRNSVR_DELAY [[minutes] This parameter determines how long an IP
Deskphone remains at the idle screen before the
screensaver is evoked. This parameterconfigures
the delay, in minutes, for the display screensaver of
newly created profiles. Changes to this value
through the Prefs context-sensitive soft key
overwrites the value provided through provisioning.
The values, in minutes, are 5, 10, 30, and 60. The
default value is 10.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 79