User's Manual

— conn_keep - keep-alive time in seconds
MENU_AUTO_BACKOUT [x] This parameter is a menu auto back-out time
preference configuration used to configure the auto
back-out time on newly created profiles (not for
profiles that already exist). The values, in seconds,
are 0, 15, 30, 60, 120, 300, 600. The default value
is 30.
- x – 0, 15, 30, 60, 120, 300, and 600
For example, MENU_AUTO_BACKOUT 15.
Note:
There are some application screens that do not
time out. Some menus, such as the
administration menus, require the user to press
the Back or Quit key to exit the screen.
AUTOCLEAR_NEWCALL_MSG [YES |
NO]
This parameter configures the missed calls
notification mode. YES means that the notification
is cleared as soon as the inbox is entered without
needing to visit all missed entries. The default value
is NO.
- YES – configures missed calls notification mode.
- NO – does not configures missed calls notification
mode (default)
This configuration value only affects users when a
user profile is first created. It does not affect a user
profile which already exists. A user can modify the
feature parameter by using the Preferences menu
on the IP Deskphone and then selecting the
Feature Options > Missed Call Notification menu
item.
LOGIN_BANNER_ENABLE [YES |
NO]
This parameter enables or disables the
customizable login banner. If configured as enable,
the flag causes the login of the primary user to
display the provisioned banner text as part of the
login process. The banner text file is a separate file
downloaded by provisioning. The banner text file is
specified much like the current dialing plan is
specified (file name listed in 1xxxeSIP.cfg, under
section [LOGIN_BANNER], and is downloaded
when enabled or disabled. To be accepted, the file
must contain at least one byte and must be no
bigger than 2048 bytes. The encoding of the file
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 77