User's Manual

- SIP_DOMAIN1
- SIP_DOMAIN2
- SIP_DOMAIN3
- SIP_DOMAIN4
- SIP_DOMAIN5
If E911_PROXY does not match the value defined
by these five variables, or the variable
E911_PROXY is not defined, the value of
SIP_DOMAIN1 is used as the emergency proxy.
E911_PASSWORD [password] This parameter is the password for the emergency
username that is used for making an emergency call
that does not require login. The proxy must be
configured with the same password; otherwise the
emergency call fails.
E911_TXLOC [Register | Invite]
This parameter is the variable that describes
location information that must be sent with the
REGISTER SIP message, or with the INVITE SIP
message.
- REGISTER – the location is sent in both the
INVITE and the REGISTER message.
- INVITE – the location is sent with the INVITE
only.
E911_HIDE_MESSAGE [Y | N]
This parameter configures whether or not the
message “Emergency Calls Only” is displayed
when no user is logged in and the IP Deskphone is
taken off-hook.
The default is NO, which means that the Emergency
Calls Only message is not hidden; it is displayed on
the IP Deskphone when no user is logged in and the
IP Deskphone is taken off-hook.
KEEP_ALIVE_TYPE [type_string]
This parameter indicates if OS keep-alive on the
connection is enabled.
The supported values are OS or CRLF (or any
string). The default value is OS.
— type_string - the keep-alive mode value
CONN_KEEP_ALIVE [conn_keep]
This parameter configures the time in seconds to
use for the keep-alive.
The values are from 5 to 1800 seconds. The default
value is 120 seconds.
Configure the provisioning server
76 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]