User's Manual

- x – the SIP domain number from 1 to 5
- URI – the address of the conference server
ADHOC_ENABLED [x] [YES | NO] This parameter configures support for ad hoc
conferencing for the Call Server. The default value is
NO. If a service package is used then this is provided
by the service package.
- x – the SIP domain number from 1 to 5
- YES – the Call Server supports ad hoc
conferencing.
- NO – the Call Serverr does not support ad hoc
conferencing.
MAX_ADHOC_PORTS[x]
[max_ports_number]
This parameter configures the maximum number of
adhoc conference participants that can join the
conference on the IP Deskphone.
- x – the SIP domain number from 1 to 5
- max_ports_number - number of participants from 0
to 4. The default value is 0.
INTERCOM_PAGING [YES | NO]
This parameter allows the IP Deskphone to belong
to a paging group. When a page group call is
received, a one-way speech path is created to the
IP Deskphone, and the IP Deskphone automatically
goes to a handsfree intercom state. This is used
with the SCS proxy. The default value is NO.
- YES – intercom/paging functionality is enabled.
- NO – intercom/paging functionality is disabled
(default).
LOGOUT_WITHOUT_PASSWORD
[YES | NO]
This parameter allows the user to log off without
entering their password if the administrator enables
LOGOUT_WITHOUT_PASSWORD feature. If
USE_AUTOLOGIN_ID is used then the user is not
able to log out of the IP Deskphone. The default
value is NO.
- YES – enables the user to logout without a
password.
- NO – does not allow the user to logout without a
password (default).
Configure the provisioning server
74 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]