User's Manual

verify that early media is being received. See
RFC3262 for details.
Note:
ENABLE_PRACK must be configured as NO when
connected to the MCS 5100 Release 3.5 system.
Note:
ENABLE_PRACK is provisioned after user logoff.
- YES – enables PRACK.
- NO – disables PRACK and is the default value.
PROXY_CHECKING [YES | NO] This parameter enables and disables extra security
checking when incoming requests are sent to the
IP Deskphone. The IP Deskphone with SIP Software
always sends requests through an outgoing proxy.
However, it is possible, through this configuration, to
be able to accept an incoming request directly or
through an incoming proxy.
- YES – the request must come directly from the proxy
server. YES is the default to enable proxy
checking.
- NO – the request can be sent directly to the
IP Deskphone. (NO is only suitable in a few
situations).
ENABLE_BT [YES | NO] This parameter is a flag to enable and disable
Bluetooth support in the IP Deskphone.
- YES – enables Bluetooth.
- NO – disables Bluetooth. The default is NO.
Note:
This applies to the Avaya 1100 Series IP
Deskphones only.
AudioCodec <n> [codec id]
<description>
This parameter is a command that specifies the
codecs that are available for the user to select. You
can configure up to 15 codecs.
- n – the codec number. The value is 1 to 15.
- codec ID – the codec identifiers are as follows:
• PCMA
Configure the provisioning server
64 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]