User's Manual

Note:
When using this setting, the user is prevented from
logging off the IP Deskphone.
Note:
If Autologin ID is enabled in the IP Deskphone-
specific configuration file, it is recommended that
AUTOLOGIN_ENABLE be configured as either
Yes/No or 1/0 in the device configuration file. This
recommendation facilitates migrating an
IP Deskphone that uses the IP Deskphone-specific
configuration file to not using the IP Deskphone-
specific configuration file. The migration to just
using the device configuration file can be done by
deleting the IP Deskphone-specific configuration
file. If the device configuration file does not have the
matching parameters in the IP Deskphone-specific
configuration file, the IP Deskphone continues to
use the previously assigned settings after the
IP Deskphone-specific configuration file is deleted.
This recommendation applies to other parameters
in the IP Deskphone-specific configuration file.
AUTO_UPDATE [YES | NO] This parameter is a command to enable or disable the
automatic updating of the IP Deskphone with SIP
Software configuration files from the provisioning
server. Enabling this command causes the
IP Deskphone with SIP Software to check for updates
once every day. The default is disabled.
- YES – turns on the AUTO_UPDATE feature.
- NO – turns off the AUTO_UPDATE feature.
Note:
If the IP Deskphone encounters any Major or
Critical error in memory during the Auto update
process, the IP Deskphone reboots based on the
recovery level set.
AUTO_UPDATE_TIME [x] This parameter is the actual time in seconds, starting
from midnight, before an automatic update occurs.
Each IP Deskphone adds random numbers to the time
specified by this command so every IP Deskphone
does not try to access the provisioning server at the
Configure the provisioning server
62 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]