User's Manual

The allowed values of the parameter are from 30 to
300 seconds. The default value is 30 seconds.
— timeout_sec – timeout value in seconds
IP_OFFICE_ENABLE [YES | NO] This parameter is a command that specifies if IP
Office-specific features are active on the IP
Deskphone or not. The default value is NO.
- YES – IP Office-specific features are active.
- NO – IP Office-specific features are not active.
IPOFFICE_CONF_CODE
[opt_string]
This parameter allows the administrator to configure
the Conf soft key. If the parameter is configured, the
IP Deskphone user is able to call the IP Office option
"Conference".
— opt_string = code of the Conference option
Example:
IPOFFICE_CONF_CODE *3
Note:
The option is available if IP_OFFICE_ENABLE is
YES.
The code of the option is specified in the IP Office
Administration Guide
IPOFFICE_MSG_CODE [opt_string] This parameter allows the administrator to configure
the Msgs soft key. If the parameter is configured, the
IP Deskphone user is able to call the IP Office option
"Send Message”.
— opt_string - code of the Send Message option
Example:
IPOFFICE_MSG_CODE *5
Note:
The option is available if IP_OFFICE_ENABLE is
YES.
The code of the option is specified in the IP Office
Administration Guide
IPOFFICE_REDIAL_CODE
[opt_string]
This parameter allows the administrator to configure
the Redial soft key. If the parameter is configured, the
IP Deskphone user is able to call the IP Office option
"Redial”.
— opt_string - code of the Redial option
Configure the provisioning server
60 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]