User's Manual

EXP_MODULE_ENABLE [YES | NO]
- YES – the IP Deskphone detects and enables an
expansion module.
- NO – the IP Deskphone does not detect an
expansion module. This is the default option.
MAX_RING_TIME [x]
This parameter is an n integer between 30 and 600
that configures the number of seconds for incoming
calls to ring before ignoring them.
The default value is 120.
ENABLE_UPDATE [YES | NO]
- YES – enables UPDATE message support and adds
“UPDATE” to ALLOW header. This is the default
option.
- NO – disables UPDATE message support.
Note:
ENABLE_UPDATE is provisioned after user
logoff.
PROMPT_ON_LOCATION_OTHER
[YES | NO]
- YES – prompt the user to select new location if
location “other” was previously selected.
- NO – do not prompt the user to select new location
if location “other” was previously selected. This is the
default option.
VMAIL [vmail_number]
This parameter is the voice mail address, which can
be the URI or the DN number of the voice mail server.
This command takes a string as a parameter. This is
the default link for a new user profile only. Individual
users can customize the link through Prefs, Message
Options, Voice Mail Settings. This command has no
effect on the user profiles after it is created.
vmail_number is the number or URI of the voice mail
server.
VMAIL_DELAY[x]
This parameter is a delay, configured in milliseconds,
between when the voice mail server answers the call
and the start of dialing the voice mail user ID. The
default value is 1000ms.
- x – the delay in milliseconds
LLDP_WAITING_TIME
[timeout_sec]
This parameter allows the administrator to configure
the timeout in seconds the client should wait for the
LLDP response.
Feature configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 59