User's Manual

When this parameter is changed, the system resets.
SFTP_WRITE_PATTERNS [x] This parameter enables file extensions to write from the
IP Deskphone. The default values are .cfg and .dat. The
write pattern for this entry should be strictly followed. A
valid example is as follows:
SFTP_WRITE_PATTERNS ..cfg,.txt,.wr1,.wr2
Important:
Ensure there are no spaces between the extensions.
When this parameter is changed, the system resets.
HASH_ALGORITHM [SHA1 |
MD5]
This parameter provides the hash algorithm. The default
value is SHA1.
- SHA1 – algorithm is Secure HASH Algorithm 1
- MD5 – algorithm is Message-Digest algorithm 5
MKI_ENABLE [YES | NO]
This parameter indicates whether to use the Master Key
Identifier (MKI) or not. The default value is NO.
- YES – MKI is configured
- NO – MIK is not configured
EAP [MD5 | TLS | PEAP |
DISABLE]
This parameter allows the administrator to ensure that
individual devices are authorized to access the
enterprise LAN environment. The default value is
DISABLE.
- MD5 – MD5 encryption
- TLS – TLS encryption
- PEAP – PEAP encryption
- DISABLE – erases existing IDs and Passwords
EAPID1 [x]
The administrator is prompted to enter the EAP ID
EAPID1 when EAP-MD5, EAP-TLS, and EAP-PEAP/
MD5 are selected.
- minimum value – 4 characters
- maximum value – 20 characters
EAPID2 [x]
The administrator is prompted to enter the EAP ID
EAPID2 when EAP-PEAP is selected. If the
administrator only enters the ID 1 value, the ID 2 has the
same value as ID 1.
Server and network configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 53