User's Manual

tt 0x <TID>
checkStack 0x <TID>
To print out the list of all supported commands and short description you can enter the "?"
command when PDT prompt is displayed, for example PDT> ?.
PDT for USB flash drive
The PDT contains commands that allow the IP Deskphone to display file system information
on the first valid USB flash drive attached to the IP Deskphone. File system information is not
displayed in the True Flash File System (TFFS) because there are already commands in the
PDT to perform similar operations for the TFFS.
The following table describes the USB flash drive PDT commands.
Table 77: USB memory stick PDT commands
Shell Commands Description
usbFsShow Displays MSDOS volume configuration data of /bd0 (USB
flash drive).
usbls [dirname] [-
f]
Lists the contents of a directory [dirname] in /bd0 . If
the -f flag is specified, print details.
usblsr [dirname] Lists the contents of a directory [dirname] in /bd0 and
any of the subdirectories.
usbcd [dirname] Changes the directory to [dirname] relative to the current
directory.
The following is a sample display on the command usbFsShow in the PDT, on a 1G Kingston
DataTraveler 2.0 flash drive.
PDT for USB flash drive
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 351