User's Manual

Command Description
reset2factory >reset2factory Resets the IP Deskphone to the default setting. See
Activating Reset to Factory Setting using SSH_PDT on
page 342.
routePrint Displays GW IPv6 addresses.
ifShow Displays IPv4 interface.
ping Sends ICMPv6 Echo Request messages and records
the receipt of ICMPv6 Echo Reply messages. With
ping, the IP Deskphone can detect network or host
communication failures and troubleshoot common
IPv6 connectivity problems. Link-Local and Global
addresses, as well as other node names, can be
pinged.
v6ParmsShow Displays all of the IPv6 related parameters:
• IPv6 Enabled
• Phone IPv6 address (if, entered manually or learned
from DHCPv6 server)
• Phone IPv6 prefix
• DNS server 1 IPV6 address
• DNS server 2 IPV6 address
• Provisioning server data: protocol and IP address.
routePrint, routepr, netstat "-nr" Display routing table IPv4 and IPV6 entries.
ip6statShow Display IPv6 interface statistics, such as the total IPv6
packets and fragments sent and received.
You can request the following commands to the support team if you have any issues:
• printSetInfo
• prtcfg
• prtlog 0
• prtlog 1
• netinfo
• arpShow
• memShow
• routeshow
• i
The command ( i ) displays the list of tasks with TID and STATUS fields. For every task that
has SUSPEND status in the list, enter the following commands:
ti 0x. <TID>
Diagnostics and troubleshooting
350 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]