User's Manual

Command Description
If the input parameter is incorrect, the following
notification appears:
>prtlog: incorrect type of manager <x>
clearLogFile Clears a content of the ECR-log file
setLogLevel <loglevel> Configures log level, where the loglevel is in the range
0...3:
• If loglevel == 0—logging disabled
• If loglevel == 1—logging only Critical errors
• If loglevel == 2—logging Critical and Major errors
• If loglevel >=3—logging any type of errors
printLogLevel Print log level
setRecoveryLevel <reclevel> Sets up recovery level, where the reclevel is in the
range 0...3. If the Auto Recovery option is ON, the
IP Deskphone behaves as follows:
• If reclevel == 0—recovering disabled
• If reclevel == 1—recovering on only Critical errors
• If reclevel == 2—recovering on Critical and Major
errors
• If reclevel >= 3—recovering on any errors
printRecoveryLevel Prints recovery level
taskMonShow Prints a list of monitored tasks
I Prints all task information
ti <taskName | task id> Print task information
memshow [level] Show memory information
checkStack <taskName | task id> Check stack of some task
tt <taskName | task id> Print Task Trace
info Print HardwareID, SoftwareID, MAC and BT address
prtcfg Prints content of the IP Deskphone configuration file,
SystemConfig.dat in FFS. The file contains
IP Deskphone-specific configuration. The content of
this file is formed from the content of several
downloadable configuration files:
• Device Configuration file
• Tones file
• Language file
Diagnostics and troubleshooting
348 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]