User's Manual

Deskphone, see Create the SIP provisioning file on the provisioning server on
page 34.
2. The IP Deskphone config file must include a [LICENSING] section to enable the IP
Deskphone to download the licence file. Add [LICENSING] section to the IP
Deskphone .cfg file.
Examples of IP Deskphone cfg files are 1120eSIP.cfg, 1140eSIP.cfg, 1165eSIP.cfg,
1220eSIP.cfg, and 1230eSIP.cfg.
For example:
[FW]
DOWNLOAD_MODE AUTO
VERSION 3.00.xx.yy
PROTOCOL TFTP
FILENAME SIP 1140_e03.02.xx.yy.bin
...
[LICENSING]
DOWNLOAD_MODE AUTO
VERSION 000001
FILENAME ipctoken.cfg
3. Place the IP Deskphone license file on the provisioning server.
4. Start the provisioning server so the IP Deskphone can retrieve the .cfg files when
the server starts.
When the new license file is downloaded to the phone from the provisioning server, it overwrites
the existing license file and reboots the phone to activate the new license.
[LICENSING] section
The IP Deskphone config file must include a [LICENSING] section to enable the IP Deskphone
to download the licence file. The [LICENSING] section specifies a wild card filename which
uses the IP Deskphone MAC address as the filename with the cfg prefix and suffix.
The following format is an example of the [LICENSING] section that is added to the IP
Deskphone config file (1xxxe.cfg):
[LICENSING] VERSION version FILENAME X*.Y
The following table describes the items in the [LICENSING] section.
Table 49: Description of items in the [LICENSING] section of the config file.
Field name
Field value Description
[LICENSING] — Section header for licensing
config file information.
VERSION 000001 The version of the license
file.
[LICENSING] section
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 287