User's Manual

Figure 57: EAP configuration menu
The administrator can do the following:
• When MD5 is selected, the administrator is prompted to enter ID1 and Password.
• When PEAP is selected, the administrator is prompted to enter ID1, ID2 and Password.
If the administrator enters only ID1, then ID2 has the same value of ID1.
• When TLS is selected, the administrator is prompted to enter ID1.
Note:
Before using EAP-TLS a device certificate must be installed.
• When Disable is selected, the existing IDs and passwords are erased.
The following is a list of additional provisioning file parameters for EAP support in addition to
the UI parameters on the Device Settings screen
Table 47: EAP Provisioning Parameters
Parameter
Purpose Default Allowed
EAP EAP mode DISABLED DISABLED/MD5/
PEAP
EAPID1 Device ID1 Empty String (4 to 20
characters)
EAPID2 Device ID2 Empty String (4 to 20
characters)
EAPPWD Password Empty String (4 to 12
characters)
EAP Authentication
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 273