User's Manual

- RSA_WITH_AES_128_CBC_SHA
- RSA_WITH_AES_256_CBC_SHA (default)
SIGN_SIP_CONFIG_FILES
This parameter overrides the file signing of a file,
such as the device configuration file and the dial
plan file. You cannot override the file signing of
the Security Policy and Customer Certificates.
The acceptable values are as follows:
- YES – Signing is required.
- NO – No authentication check is performed
(default).
FP_PRESENTED If the resource file is not signed and if there are
no customer certificates, then you are prompted
with a Finger Print display with accept or reject
options.
FP_ENTERED
If the resource file is not signed and if there are
no customer certificates, then you must
manually enter the Finger Print value and then
select Accept.
SUBJ_ALT_NAME_CHECK_ENABLE
This parameter checks the Subject Alternative
Attribute in the presented certificate. The
acceptable values are YES and NO. The default
value is NO.
Note:
Currently only IPv4 IP Address is supported
for this attribute.
CUST_CERT_ACCEPT_VAL_NO_CHECK This parameter is added to the existing values.
Acceptable values for this parameter are as
follows:
- VAL_NO_CHECK
- VAL_NO_MANUAL
- VAL_MANUAL_A (default)
- VAL_MANUAL_B
SEC_POLICY_ACCEPT This parameter is for Security Policy File
acceptance. Acceptable values for this
parameter are as follows:
- VAL_MANUAL_A – If the resource file is not
signed and if there are no customer
certificates, then you are prompted with a
Certificate-based authentication
268 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]