User's Manual

TLV Fields
Bit 3 = 0 – PSE pair selection can not be controlled
PSE power pair = 1
Power Class = 3 for 1120E/1140E/1165E IP Deskphones
Link Aggregation Aggregation status = 0; the link is not capable of being aggregated, and
currently is not in aggregation.
Aggregated Port ID = 0
Maximum frame
size
The MAC/PHY supports an extension of the basic MAC frame format
for Tagged MAC frames. The maximum frame size is configured to
1522.
LLDP-MED
System
Capabilities
Bit 0 = 1—LLDP-MED Capabilities–supported
Bit 1 = 1—Network Policy–supported
Bit 2 = 1—Location Identification–supported
Bit 3 = 0—Extended Power using MDI-PSE–not supported
Bit 4 = 1—Extended Power using MDI-PD–supported
Bit 5 = 1—Inventory–supported
The Class Type field can be configured to 3 -Telephone
Network Policy
Discovery
Application Type-1—voice
Unknown Policy Flag (U)—1 only if the policy is unknown
Tagged Flag (T)—configure accordingly
Reserved (X)-0 VLAN ID—configure accordingly
L2 Priority—configure accordingly
DSCP Value—configure accordingly
Location
Identification
Discovery
Coordinate-based LCI–16 bytes
Civic Address LCI I–variable length
This format can have more than one address element and one address
element can range from a minimum of 7 to 256 bytes.
ECS ELIN I–variable between 10 and 25 bytes
Although location is received, it is not available to end user in this
release of the SIP Software.
Extended Power-
via MDI Discovery
Power Type = 01–PD Device
Power Source = 00–Unknown.
There is no hardware support for determining the power source.
Power Priority = 0010–High
Power Value = Maximum power required as shown below:
1120E NTYS03 = 8
1140E NTYS05 = 8
1165E NTY507
Software Revision Configure to the software version being used, for example, 0604D97.
Manufacturer
Name
“Avaya-xy”, where: xy is a 2-digit manufacturer code as shown below:
1120: Code 01
1140: Code 01
1165:
Features
202 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]