User's Manual

TLV Fields
If you disable the PC Ethernet port, the advertised enabled capabilities
configured to Telephone only.
Port VLAN ID PVID = 0
The IP Deskphone does not support port-based VLAN operation.
Port And Protocol
VLAN ID
PPVID = 0
Port and Protocol VLAN is not supported and not enabled.
VLAN Name VLAN name field is configured to “data” and “voice”.
Protocol Identity
1. STP:
Protocol identity = the first 8 bytes of an STP PDU starting with the
Ethertype field.
Length = 8
Protocol Identity = 0x00 0x26 (type/length field of Ethernet packet,
size=38) 0x42 0x42 0x03 (LLC header indicating STP) 0x00 0x00
(Protocol Identity field from STP BPDU) 0x00
2. 802.1x:}
Length = 3
Protocol identity = 0x888E—(802.1x Ethertype) 0x01—(Version
field from 802.1x frame)
3. LLDP:
Length = 2
Protocol identity = 0x88CC—(LLDP Ethertype)
MAC/PHY
Configuration/
Status
Auto-negotiation support/status =
Bit 0 = 1 [Auto-negotiation supported]
Bit 1 = 1 or 0, depending on the current auto-negotiation status, for
example, either enabled or disabled.
PMD auto-negotiation advertised capability =
0x4000 - 10BASE-T half duplex mode 0x2000 - 10BASE-T full duplex
mode
0x0800 - 100BASE-TX half duplex mode
0x0400 - 100BASE-TX full duplex mode
0x0002 - 1000BASE-TX half duplex mode
0x0001 - 1000BASE-TX full duplex mode
Operational MAU Type =
10 – UTP MAU, 10BT, half duplex mode
11 – UTP MAU, 10BT, full duplex mode
15 - 2-pair Category 5 (CAT5) UTP, 100BT, half duplex mode
16 - 2-pair CAT5 UTP, 100BT, full duplex mode
29 – 4-pair CAT5 UTP, 1000BT, half duplex mode
30 – 4-pair CAT5 UTP, 1000BT, full duplex mode
Power Via MDI MDI power support = 0:
Bit 0 = 0 – Powered Device
Bit 1 = 0 – PSE MDI power not supported
Bit 2 = 0 – PSE MDI power state disabled
802.1ab Link Layer Discovery Protocol
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 201