User's Manual

Figure 21: Main feature key programming screen showing Speed Dial List provisioned on key 6
A feature key provisioned for use as a Speed Dial List has a similar appearance to all other
programmed feature keys on the idle screen (or in-call screen). The label used for that key is
provided through provisioning.
When the user presses the feature key provisioned as a Speed Dial List, the list of speed dials
configured appears on the screen, and the user can select an item from the list to invoke Speed
Dial.
If the Speed Dial List is empty, or ends up empty due to context-sensitive hiding of contents,
the error message "Not available" is displayed on the screen with a "Dial List" context line.
Speed Dial List screen
The Speed Dial List screen for the IP Deskphone is where the user can select or invoke one
of the provisioned Speed Dial List entries.
The following image is an example of the screen that appears after the user presses the feature
key that is provisioned as the Speed Dial List for the IP Deskphone.
Figure 22: Example of a Speed Dial List
The Speed Dial List screen displays all the Speed Dial List entries provisioned for the user.
The listed items displayed are based on the provisioned list as well as the current Idle or Mid-
call state of the IP Deskphone. When the Speed Dial List is invoked while the IP Deskphone
is idle, only Speed Dial List entries that are configured as IDLE are displayed. Similarly, only
items marked as MID CALL are displayed if the Speed Dial List is invoked while the IP
Deskphone is in a call.
Speed Dial List
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 163