User's Manual

After you press a single account Call Forward programmed key:
• If the account is already forwarding calls to the programmed target, call forwarding is
deactivated.
• If the account is not forwarding calls to the programmed target, the account is set to
forward calls to the given target, disabling DND if necessary, and overriding any other call
forward target that is active for the account.
After you press a forward all programmed key:
• If all accounts are already set to forward calls to the key target, call forward is disabled
for all accounts (behaves like the forward all option).
• If all accounts are not configured to forward calls to the key target, call forwarding is
activated for all accounts using the key target (behaves like the forward none option).
If you do not perform any Call forwarding or DND operations, you can press the single and all
keys to switch one or all accounts between forwarding to key's target and not forwarding
states.
The Call Forward mode and target is persistent for each account. If you restart the IP
Deskphone, or log off the account and log the account back on, the account maintains the
original state.
Presence
After you select the Presence command from the Services menu, you are prompted to specify
which presence state of the account you want to modify. The all option lets you set all accounts
to the same presence in one operation.
If you select a single account, the current state of the account is displayed. You can change
the current state of the account by entering the new presence state and note. After you confirm
the operation, the new presence state is applied.
If the all option is selected, no current state is displayed, and you are immediately prompted
to select the new state. The new state is applied to all registered accounts.
If you use a programmed Presence feature key, the account that is impacted by the Presence
feature key is determined after the feature key is configured.
After you press a single account Presence programmed key:
• If the account is already set to the programmed presence state, the account is set back
to the Connected presence state.
• If the account is not already set to the programmed presence state, the account is set to
the programmed presence state.
Multiuser
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 153