User's Manual

Configuration
Depending on server policy, the Multiuser feature can require you to configure the
PROMPT_AUTHNAME_ENABLE value to YES in the device configuration file. This enables a
prompt that requires you to enter an Authentication ID that is different from the Login ID. For
example, CS 1000 requires an Authentication ID to find a corresponding TN and a Login ID to
find a key; enabling PROMPT_AUTHNAME_ENABLE creates a prompt for the authentication
ID.
When you configure Multiuser, consider the following parameters:
• MAX_LOGINS represents the number of user accounts that can log on at the same time.
Configure MAX_LOGINS to any value greater than one; the default is 24.
• Configure DOD_ENABLE to NO; a secondary user cannot log on if DOD_ENABLE is enabled.
The default value is NO.
• The SELECT_LAST_INCOMING parameter determines call selection when multiple calls
are in the Ringing state. If you configure SELECT_LAST_INCOMING to NO, the first
selected call remains the selected call as new calls are added to or drop from the list of
ringing calls. If you configure this value to YES, the selected call becomes the ringing call
last added to the list. The default value is NO.
Initial logon
To log on for the first time, you must enter a user name and password, and specify if the logon
is permanent or not. On the logon screen, you can choose which domain you want to access,
and change the language you want to use. You can use the Domain key only to select a domain
from the configured list; you cannot modify domains.
Figure 11: Primary logon screen
After you log on, the idle screen appears on the IP Deskphone. If there is no profile for the
primary account, the IP Deskphone automatically creates a profile. You can create up to five
profiles. If you exceed the limit of five profiles, the IP Deskphone automatically deletes the least
recently-used profile.
Similarly, configurations for each user of the primary account are loaded after a user logs on
to the IP Deskphone. The configurations are independent of the profile; if the account you use
Multiuser
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 141