User's Manual

Config option Options or input Description
• HTTP
• HTTPS
Device ID ID used by provisioning
server to authenticate the IP
Deskphone. Enter the User
ID as the Device ID. TFTP
does not require Device ID.
Password Password used by
provisioning server to
authenticate the IP
Deskphone. Maximum
number of characters is 99.
PVQMon IP IP address PVQM server IPv4 or IPv6 IP
address.
Note:
Maximum of 1 PVQM
server can be configured.
NAT Traversal NAT Signal
• None
• STUN
NAT method for SIP
signaling.
Note:
IPv4 mode only (IPv6
disabled).
NAT Media
• None
• STUN
NAT method for media
signaling.
NAT TTL (sec) Value from 0 to 65535.
STUN S1 IP IP address IP address of STUN S1
device.
STUN S2 IP IP address IP address of STUN S2
device.
Media Security Enable SRTP SRTP enabled.
SRTP Mode
• BE-Cap Neg
• BE-2M Lines
• SecureOnly
SRTP configuration values.
Cipher1 Preferred order for SRTP
cipher offers.
Manual provisioning parameters
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 135