User's Manual

Configuring parameters manually for the IP Deskphone

Procedure

1. Press Auto on the Configuration page to switch to the Auto Provisioning page.

2. Perform one of the following actions:

• Press the AllMan soft key to change all parameters to be manually

provisioned.

• Use the dial pad to enter the number associated with the parameter, or use

the navigation keys to scroll and highlight the specific parameter (up/down

navigation takes you from group to group, while left/right navigation takes you

from item to item). Press the Enter key to check the parameter, making it

"Manual" provisioned.

3. To exit and save, press the Config key to return to the Device Settings page, then

press Apply.

Configuring parameters automatically for the IP

Deskphone

About this task

Perform the following procedures to configure all parameters or specific parameters using

automatic provisioning.