User's Manual

Configuration
You can store common provisioning parameters in a managed central server, such as a DHCP,
TFTP, or HTTP server. You can configure the IP Deskphone to automatically or manually obtain
the provisioning parameters from the various provisioning sources.
For automatic provisioning, the IP Deskphone receives the parameters from the provisioning
server. You can switch between automatic provisioning to manual provisioning on the Auto
Provisioning page. You enter parameter information on the Configuration page.
Provisioning IP Deskphone parameters
By default, the IP Deskphone can automatically provision most parameters. However, you can
manually provision parameters. The Auto Provisioning page provides the selection to manually
override the parameter. Use the Device Settings menu item to configure IP Deskphone
parameters. Double-press the Globe key to open the Network menu and press 2 on the dial
pad to open the Device Settings menu.
The Configuration page appears when you select the Device Settings menu item. Any
automatic provisioned parameters appear dimmed.
The Device Settings menu shows the configuration parameters that are configured as Manual
on the Auto Provisioning page. Use the Up and Down navigation keys to scroll through the
main configuration options and the Right or Left navigation keys to scroll through the sub
configuration options.
For all supported IP Deskphones, you can press the Auto soft key to switch to the Auto
Provisioning page to define parameters that you can obtain automatically or manually. Then
from the Auto Provisioning page, you can press the Cfg soft key to switch to the Device
Settings option.
Provisioning the IP Deskphones
126 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]