User's Manual

to scroll through the menu items. Press the Select key to select the highlighted
menu item.
Table 8: Using the Navigation key cluster to navigate in the Local Tools menu
Key Action
Down Moves highlight down
Up Moves highlight up
Right Selected current menu item
Left Closes menu
Select key (center of cluster) Selects current menu item
To close this menu, use the Quit key.
2. Select 2. Local Diagnostics in the Local Tools menu by pressing the key in the
Navigation key cluster or by pressing the number 2.
3. Select IP Set Information by pressing the Select key in the Navigation key cluster
or by pressing the number .
4. Use the down arrow in the Navigation key cluster to scroll down the menu to
Software Version.
5. Note the UNIStim software version number and write it down.
Compare the version number to the minimum-required UNIStim software version
(0625C39).
UNIStim software version names contain numbers and letters. Use the last three
characters in a version to compare the version of UNIStim on an IP Deskphone
(0625C39) with the minimum required version for the upgrade. Note that C23 is
greater than C39 and C1B is less than C39.
If the version number is equal to or higher than 0625C39, go to the section
Convert UNIStim
software to SIP Software on the IP Deskphone on page 121.
If the number is lower than 0625C39, see Upgrade UNIStim software to the minimum required
UNIStim software on page 118 and follow the instructions to upgrade an IP Deskphone to the
minimum-required version of UNIStim software before you convert to SIP Software.
Upgrade UNIStim software to the minimum required UNIStim
software
Use either of the following two methods to upgrade UNIStim software.
Upgrade and convert the IP Deskphone software
118 SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012
Comments? [e-mail]