User's Manual

Chapter 9: Upgrade and convert the
IP Deskphone software
This chapter describes how to upgrade an IP Deskphone with UNIStim software to SIP Software.
n order to upgrade an IP Deskphone with UNIStim software, first determine if you have the minimum
UNIStim software release on the IP Deskphone (0625C39). If your IP Deskphone is installed with the
minimum version of UNIStim software, proceed to the section
Convert UNIStim software to SIP Software
on the IP Deskphone on page 121. If your IP Deskphone is not installed with the minimum version of
UNIStim Software, proceed to the section Upgrade UNIStim software to the minimum required UNIStim
software on page 118.
To convert the firmware on the IP Deskphone from SIP to UNIStim, see the section Convert SIP Software
to UNIStim Software on page 123.
Upgrade the SIP Software on the IP Deskphone
Use the following procedures to upgrade existing SIP Software to new SIP Software on the
IP Deskphone.
Download the SIP Software to the provisioning server
To download the SIP Software, perform the following procedure.
Downloading SIP Software for the IP Deskphone
1. Go to
http://www.avaya.com/support.
2. Log on to the Avaya Web site with a valid Avaya User ID and Password.
The Support page appears.
3. Enter the IP Deskphone type in the TheInSite Knowledge Base box.
4. Press the red arrow at the end of the TheInSite Knowledge Base box to obtain the
Search Results.
5. From the Search Results, select and download the appropriate version of the SIP
Software for the IP Deskphone, for example, SIP Avaya 1165E IP Deskphone
Release SIP1165e03.02.16.00.bin.
6. Place the selected software on the provisioning server.
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 115