User's Manual

VOCODER_FLAG_G723_
RA
TE_63
VOCODER_G729
VOCODER_G722
VOCODER_PCM16
VOCODER_PCM8
vqmonVocoderTypeUnkno
wn
LISTENING_R_WARN = 70
(default if not configured
and unknown type)
LISTENING_R_EXCE = 60
LISTENING_R_WARN [xx] This parameter is the threshold to send a report on Listening
R less than [xx]. The default value is 70. Using 0 resets it to
default based on far end VOCODER.
- xx – is an INTEGER value used as threshold.
LISTENING_R_EXCE [xx] This parameter is the threshold to send a report on Listening
R less than [xx]. The default value is 60. Using 0 resets it to
default based on far end VOCODER.
- xx – is an INTEGER value used as threshold.
PACKET_LOSS_ENABLE
[YES | NO]
This parameter is used to enable or disable the alerts based
on the packet loss thresholds. Packet loss is the fraction of
R
TP data packets from the source lost since the beginning of
reception. The value is an integer scaled by 256. The range is
1 to 25600.
- YES – enables the sending of alert report based on the
packet loss.
- NO – disables the sending of alert report based on the packet
loss.
PACKET_LOSS_WARN [xx] This parameter is the threshold to send a report on Packet
Loss greater than [xx]. The default is 256 (1%). Using 0 resets
the threshold to default.
- xx – is an INTEGER value scaled by 256 that is used as
threshold. The range is 1 to 25600.
PACKET_LOSS_EXCE [xx] This parameter is the threshold to send a report on Packet
Loss greater than [xx]. The default is 1280 (5%). Using 0 resets
the threshold to default.
- xx – is an INTEGER value scaled by 256 that is used as
threshold. The range is 1 to 25600.
JITTER_ENABLE [YES | NO] This parameter enables or disables alerts based on the inter-
arrival Jitter on incoming RTP packets inter-arrival time. The
value is represented in 1/65536 of a second.
VQMon configuration commands
SIP Software for Avaya 1100 Series IP Deskphones-Administration November 2012 89